Testing Equipment

A dielectric breakdown voltage test is a measure of the electrical stress that an insulating oil can withstand without breakdown. This test is performed for verifying the dielectric strength of the oil of the transformer. Dielectric Strength is the maximum capacity to resist the voltage of insulating oil. Smooth operation from zero potential to FSV with motorized (Automatic) operation. Easy adjust “ locking of electrode gap (2.5mm Go-NoGo Gauge). Fast precision breakdown detection. Voltage Range : 60KV / 80KV / 100KV. HV Chamber Interlock, Zero Start Interlock, Overload Trip for operator protection. Semi-autometic Motorized control of output for easy operation. 2 kV / Sec Voltage Rise Rate. Indications for Test ON Audio as well as Visual Indication. Pushbuttons of Test ON / OFF and Motorized Switch for easy operation. Digital Display Output (7 Segment LED Display). Precise HV trip voltage measurement, voltage hold after trip. Epoxy cast, long life HV transformer for reliable life long operation. Compliance to IS 6792 & Other Standards.

The 200A Relay Tester is a semi-automatic industrial testing device manufactured with mild steel. It operates with a voltage of 230V and a power supply of 200A, making it a reliable and efficient tool for testing relays in various industrial settings. Its sturdy construction ensures that it can withstand harsh industrial environments, making it a long-lasting investment for businesses. The semi-automatic control mode allows for ease of use and accuracy in testing, providing reliable results every time. This product is ideal for companies that require frequent testing of relays to ensure optimal performance and safety.

Useful for No Load Loss Test (Open Circuit Test), Load Loss Test (Short Circuit Test), Double Voltage Double Double Frequency Test (Induced Over Voltage Test), High Voltage Test (High Voltage With Stand Test) - Other Test on request for Distribution as well as Power Transformers. 10A to 1200A Common Motorized Air Cooled / Oil Cooled Variac for All Test (Depends on Requirements). 3KVA to 200KVA DVDF Motor - Generator Set (Depends on Requirements). 30KV to 200KV - 30mA to 2A Oil Cooled High Voltage Transformer (Depends on Requirements). Inbuilt / External Capacitor Bank (Depends on Requirements). A Single Measurement and control center. Electrically interlocked and safe operation (Over Voltage & Over Current Protection). Motorized control of output power for easy operation. Rotary selector switch to select test for easy operation. Indication Lamps for R, Y, B, Test On, Emergency, Dimmer Zero & Tower Light with Siren. Push buttons of Test ON / OFF and Motorized Variac for easy operation. Emergency Stop Switch with indication to avoid serious accident. Zero Interlock Facility. All Electrical Solutions under one roof.

Our Company is actively devoted towards offering a huge Range of Secondary Current Injection Test Set. Our provided Current Injection Test Set is developed from the modern technology & best quality of material. Clients can avail this Current Injection Test Set from us at affordable prices in a given time frame. This Current Injection Test Set is thoroughly tested on different quality parameters by our quality analysts for delivering a defect free range.

The Secondary Current Injection Test Set is an essential tool for industrial use. With its semi-automatic control mode, it can efficiently perform current injection testing with a power supply of up to 1000A. The product is made of durable mild steel material and operates on a voltage of 230V. This test set is perfect for testing protective relays, circuit breakers, and other electrical components. Its compact design makes it easy to transport and store, while its user-friendly interface ensures efficient and accurate testing

Sr. No. Name Specification Item Descriptions 1. MotorTesting Panel Routine Testing Panel for Induction Motor 415V, 50A VIF Meter Setting For CT P :- Set 50A(Mains Supply) For PT P :- Set 350V(Mains Supply) For PT S:- Set 350V(Mains Supply) 2. Over Current Relay Settings DOL M1 Output 0.12KW-0.18KW For CT.P :- Set 10A | CT S :- Set 5A (Default) For SOC :- Set 0.8A | Trp :- Set 2 Sec 3. Over Current Relay Settings DOL M2 Output 0.25KW-3KW For CT.P :- Set 10A | CT S :- Set 5A (Default) For SOC :- Set 7A | Trp :- Set 2 Sec 4. Over Current Relay Settings DOL M3 Output 4KW-11KW For CT.P :- Set 30A | CT S :- Set 5A (Default) For SOC :- Set 20A | Trp :- Set 2 Sec 5. Over Current Relay Settings DOL M4 Output 15KW-22KW For CT.P :- Set 50A | CT S :- Set 5A (Default) For SOC :- Set 37A | Trp :- Set 2 Sec 6. Power Analyzer Voltage:- 600 VAC Current:- 80 AAC Phase:- 3-Phase 3-Phase Power Analyzer 600V (Phase ï Neutral) & 1050V (Phase to Phase) & 80A Direct Measurement with accuracy of ï0.1% rdg + ï0.1% rng 7. Break Output 5A 415V ï 5A AC, 230V ï 5A AC, 110V ï 5A AC, 24V - 5A DC

Key Features 0.1µÎ to 2kÎ with basic accuracy of 0.05% 41/2 digit LCD display with 0.1 Î resolution Dual Channel operation Multiple test currents - 10A, 1A, 0.1A, 0.01A Heatrun automation with state-of-the-art PC software (PE - WRM 2.0) Simultaneous readings of two windings (H.V. & L.V.) I% display Memory storage ability Live switchyard measurements Protection against overload and inductive surges Major Applications Power Transformers 400MVA/765kV Distribution Transformers Generators, Motors Specifications TEST CURRENT MEASUREMENT RANGE RESOLUTION ACCURACY I1 10 A 0-1.9999 mÎ 0.1 Î 0.05% of reading +- 0.07% of range 0-19.999 mÎ 1 µÎ 0-199.99 mÎ 10 Î 0-1.9999 Î 100 Î I2 1 A 0-19.999 mÎ 1 Î 0.05% of reading +- 0.07% of range 0-199.99 mÎ 10 Î 0-1.9999 Î 100 Î 0-19.999 Î 1 mÎ I3 0.1 A 0-199.99 mÎ 10 µÎ 0.05% of reading +- 0.07% of range 0-1.9999 Î 100 µÎ 0-19.999 Î 1 mÎ 0-199.99 Î 10 mÎ I4 0.01 A 0-1.9999 Î 100 µÎ 0.05% of reading +- 0.07% of range 0-19.999 Î 1 mÎ 0-199.99 Î 10 mÎ 0-1.9999 kÎ 100 mÎ

The 200A Relay Tester is a semi-automatic industrial testing device manufactured with mild steel. It operates with a voltage of 230V and a power supply of 200A, making it a reliable and efficient tool for testing relays in various industrial settings. Its sturdy construction ensures that it can withstand harsh industrial environments, making it a long-lasting investment for businesses. The semi-automatic control mode allows for ease of use and accuracy in testing, providing reliable results every time. This product is ideal for companies that require frequent testing of relays to ensure optimal performance and safety. FAQs of 200A Relay Tester: Q: What is the control mode of this product? A: The 200A Relay Tester operates in semi-automatic control mode. Q: What material is used in the manufacturing of this product? A: This product is manufactured with mild steel. Q: What is the recommended usage of this product? A: This product is recommended for industrial usage. Q: What is the voltage requirement for this product? A: This product operates with a voltage of 230V. Q: What is the power supply requirement for this product? A: The 200A Relay Tester requires a power supply of 200A.

The Oil Dielectric Strength Tester is a semi-automatic industrial equipment made of mild steel. It is designed to measure the dielectric strength of insulating oils used in transformers, circuit breakers, and other electrical equipment. With a voltage of 230V and temperature range up to 45C, this tester provides accurate results and ensures the safety of the equipment being tested. Its use is essential in preventing electrical breakdowns and failures caused by weak insulation. This device is suitable for use in power plants, electrical testing laboratories, and other industrial settings where electrical equipment is in use.

OIL INSULATION TESTER A dielectric breakdown voltage test is a measure of the electrical stress that an insulating oil can withstand without breakdown. This test is performed for verifying the dielectric strength of the oil of the transformer. Dielectric Strength is the maximum capacity to resist the voltage of insulating oil. Smooth operation from zero potential to FSV with motorized (Automatic) operation. Easy adjust “ locking of electrode gap (2.5mm Go-NoGo Gauge). Fast precision breakdown detection. Voltage Range : 60KV / 80KV / 100KV. HV Chamber Interlock, Zero Start Interlock, Overload Trip for operator protection. Semi-autometic Motorized control of output for easy operation. 2 kV / Sec Voltage Rise Rate. Indications for Test ON Audio as well as Visual Indication. Pushbuttons of Test ON / OFF and Motorized Switch for easy operation. Digital Display Output (7 Segment LED Display). Precise HV trip voltage measurement, voltage hold after trip. Epoxy cast, long life HV transformer for reliable life long operation. Compliance to IS 6792 & Other Standards.

Useful for No Load Test (OC), Load Loss Test (SC) (Other Test on request). A Single Measurement and control center. Electrically interlocked and safe operation. (Over Voltage & Over Current Protection) Motorized control or Hand Operated of output power for easy operation. Rotary selector switch to select test for easy operation. Indication Lamps for R, Y, B, Test On, Emergency. Push buttons of Test ON / OFF and Motorized for easy operation. Emergency Stop Switch with indication to avoid serious accident. Zero Interlock Facility. All Electrical Solutions under one roof.

It covers No Load Test, Block Rotor Test, Pump Performance Test, Reduced Voltage Test for Submersible Pump, Monoblock Pump & Centrifugal Pump etc. Direct measurement of Voltage, Current Active Power, Power Factor (PF), Apparent Power, Frequency, Head, Suction, Discharge, RPM, Corrected RPM, %Slip Compliance to BIS 8034 (As Requested) Provision of Change over Switches & Push buttons for easy operation Emergency Stop push button Push buttons to Increase & Decrease Output Voltage of Variac USB , RS-232 / RS-485 interface & Free Software 500 Test Data Storage Inbuilt in Power Analyzer Current Rating 30A/ 50A/ 75A/ 100A/ 150A/200A/ 300A (Other on Request) Basic ± 0.1% accurate Power Analyze

The Micro Ohm Meter is a highly efficient and reliable device used in the industrial sector for measuring low resistance values accurately. With a test range of 2000 Ohm, this device is perfect for measuring the resistance of conductive materials used in various industries. The semi-automatic control mode makes it easy to operate, and the voltage of 230 volts ensures that it can be used in any industrial setting. Made from high-quality mild steel, this device is durable and can withstand harsh environmental conditions. As an exporter, manufacturer, service provider, supplier, and trader, we ensure that our Micro Ohm Meter meets the highest standards of quality and performance.